From 3D Models to 3D Prints: an Overview of the Processing Pipeline

Due to the wide diffusion of 3D printing technologies, geometric algorithms for Additive Manufacturing are being invented at an impressive speed. Each single step, in particular along the Process Planning pipeline, can now count on dozens of methods that prepare the 3D model for fabrication, while analysing and optimizing geometry and machine instructions for various objectives. This report provides a classification of this huge state of the art, and elicits the relation between each single algorithm and a list of desirable objectives during Process Planning. The objectives themselves are listed and discussed, along with possible needs for tradeoffs. Additive Manufacturing technologies are broadly categorized to explicitly relate classes of devices and supported features. Finally, this report offers an analysis of the state of the art while discussing open and challenging problems from both an academic and an industrial perspective.Comment: European Union (EU); Horizon 2020; H2020-FoF-2015; RIA - Research and Innovation action; Grant agreement N. 68044

Contrasting styles of (U)HP rock exhumation along the Cenozoic Adria-Europe plate boundary (Western Alps, Calabria, Corsica)

Since the first discovery of ultrahigh pressure (UHP) rocks 30 years ago in the Western Alps, the mechanisms for exhumation of (U)HP terranes worldwide are still debated. In the western Mediterranean, the presently accepted model of synconvergent exhumation (e.g., the channel-flow model) is in conflict with parts of the geologic record. We synthesize regional geologic data and present alternative exhumation mechanisms that consider the role of divergence within subduction zones. These mechanisms, i.e., (i) the motion of the upper plate away from the trench and (ii) the rollback of the lower plate, are discussed in detail with particular reference to the Cenozoic Adria-Europe plate boundary, and along three different transects (Western Alps, Calabria-Sardinia, and Corsica-Northern Apennines). In the Western Alps, (U)HP rocks were exhumed from the greatest depth at the rear of the accretionary wedge during motion of the upper plate away from the trench. Exhumation was extremely fast, and associated with very low geothermal gradients. In Calabria, HP rocks were exhumed from shallower depths and at lower rates during rollback of the Adriatic plate, with repeated exhumation pulses progressively younging toward the foreland. Both mechanisms were active to create boundary divergence along the Corsica-Northern Apennines transect, where European southeastward subduction was progressively replaced along strike by Adriatic northwestward subduction. The tectonic scenario depicted for the Western Alps trench during Eocene exhumation of (U)HP rocks correlates well with present-day eastern Papua New Guinea, which is presented as a modern analog of the Paleogene Adria-Europe plate boundary

Kinematics, efficiency and dynamic balancing of a planetary gear train based on nutating bevel gears

The article discusses the main functional characteristics of a planetary gear train based on nutating bevel gears. System geometry, design parameters, kinematics and efficiency expressions in term of such parameters are presented. Then, an analytical model of its dynamics is developed and explicit balancing conditions to eliminate the effect of internal inertial forces are obtained. Analytical results regarding dynamics and balancing criteria are verified through multibody simulations on a sample geometry. A discussion about how to determine balancing geometries is finally carried out

FLEXICOIL: Flexible Robotized Coils Winding for Electric Machines Manufacturing Industry

Wound coils can are installed in several products (motors, generators, sensors) in order to exploit the electromagnetic effect for a wide range of applications. Small lot sizes and high product flexibility cannot be achieved with conventional winding systems. In fact, highly productive automated winding systems are not flexible enough and manual labor causes high product costs. FLEXICOIL aims at overcoming these drawbacks by developing a collaborative robotic cell for coils winding. We plan three subsequent sets of activities in order to enable the development of a reconfigurable interactive manufacturing cell with learning capabilities. The cell is designed for learning how to wind the coils of several kind of motors already on the market, through a simple teaching interface that can be easily used by operators without specific skills in robotics. The solution proposed by FLEXICOIL is affordable from small-medium enterprises (SMEs) producing small batches of motors and frequently changing product designs, while it could be an additional value for big companies having a market request of several thousand standard units

Design, Representations, and Processing for Additive Manufacturing

International audienceThe wide diffusion of 3D printing technologies continuously calls for effective solutions for designing and fabricating objects of increasing complexity. The so called "computational fabrication" pipeline comprises all the steps necessary to turn a design idea into a physical object, and this book describes the most recent advancements in the two fundamental phases along this pipeline: design and process planning. We examine recent systems in the computer graphics community that allow us to take a design idea from conception to a digital model, and classify algorithms that are necessary to turn such a digital model into an appropriate sequence of machining instructions

Design, Representations, and Processing for Additive Manufacturing

International audienceThe wide diffusion of 3D printing technologies continuously calls for effective solutions for designing and fabricating objects of increasing complexity. The so called "computational fabrication" pipeline comprises all the steps necessary to turn a design idea into a physical object, and this book describes the most recent advancements in the two fundamental phases along this pipeline: design and process planning. We examine recent systems in the computer graphics community that allow us to take a design idea from conception to a digital model, and classify algorithms that are necessary to turn such a digital model into an appropriate sequence of machining instructions

Survey of neonatal respiratory care and surfactant administration in very preterm infants in the Italian neonatal network

Introduction: Variation of respiratory care is described between centers around the world.The Italian Neonatal Network (INN), as a national group of the Vermont-Oxford Network (VON) allows to perform a wide analysis of respiratory care in very low birth weight infants. Methods:We analyzed the dataset of infants enrolled in the INN in 2009 and 2010 and, for surfactant administration only, from 2006 to 2010 from 83 participating centers. All definitions are those of the (VON). A questionnaire analysis was also performed with a questionnaire on centers practices. Results: We report data for 8297 infants. Data on ventilator practices and outcomes are outlined. Variation for both practices and outcome is found. Trend in surfactant administration is also analyzed. Conclusions. The great variation across hospitals in all the surveyed techniques points to the possibility of implementing potentially better practices with the aim of reducing unwanted variation. These data also show the power of large neonatal networks in identifying areas for potential improvement. \ua9 Mattioli 1885

Survey of neonatal respiratory care and surfactant administration in very preterm infants in the Italian neonatal network

Introduction: Variation of respiratory care is described between centers around the world.The Italian Neonatal Network (INN), as a national group of the Vermont-Oxford Network (VON) allows to perform a wide analysis of respiratory care in very low birth weight infants. Methods:We analyzed the dataset of infants enrolled in the INN in 2009 and 2010 and, for surfactant administration only, from 2006 to 2010 from 83 participating centers. All definitions are those of the (VON). A questionnaire analysis was also performed with a questionnaire on centers practices. Results: We report data for 8297 infants. Data on ventilator practices and outcomes are outlined. Variation for both practices and outcome is found. Trend in surfactant administration is also analyzed. Conclusions. The great variation across hospitals in all the surveyed techniques points to the possibility of implementing potentially better practices with the aim of reducing unwanted variation. These data also show the power of large neonatal networks in identifying areas for potential improvement. © Mattioli 1885

Association of maternal hypertension and chorioamnionitis with preterm outcomes

OBJECTIVES: We compared the relative effect of hypertensive disorders of pregnancy and chorioamnionitis on adverse neonatal outcomes in very preterm neonates, and studied whether gestational age (GA) modulates these effects. METHODS: A cohort of neonates 23 to 30 weeks' GA, born in 2008 to 2011 in 82 hospitals adhering to the Italian Neonatal Network, was analyzed. Infants born from mothers who had hypertensive disorders (N = 2096) were compared with those born after chorioamnionitis (N = 1510). Statistical analysis employed logistic models, adjusting for GA, hospital, and potential confounders. RESULTS: Overall mortality was higher after hypertension than after chorioamnionitis (odds ratio [OR], 1.39; 95% confidence interval [CI], 1.08-1.80), but this relationship changed across GA weeks; the OR for hypertension was highest at low GA, whereas from 28 weeks' GA onward, mortality was higher for chorioamnionitis. For other outcomes, the relative risks were constant across GA; infants born after hypertension had an increased risk for bronchopulmonary dysplasia (OR, 2.20; 95% CI, 1.68-2.88) and severe retinopathy of prematurity (OR, 1.48; 95% CI, 1.02-2.15), whereas there was a lower risk for early-onset sepsis (OR, 0.25; 95% CI, 0.19-0.34), severe intraventricular hemorrhage (OR, 0.65; 95% CI, 0.48-0.88), periventricular leukomalacia (OR, 0.70; 95% CI, 0.48-1.01), and surgical necrotizing enterocolitis or gastrointestinal perforation (OR, 0.47; 95% CI, 0.31-0.72). CONCLUSIONS: Mortality and other adverse outcomes in very preterm infants depend on antecedents of preterm birth. Hypertension and chorioamnionitis are associated with different patterns of outcomes; for mortality, the effect changes across GA weeks. Copyright \uc2\ua9 2014 by the American Academy of Pediatrics

Breakthrough Cancer Pain: Preliminary Data of The Italian Oncologic Pain Multisetting Multicentric Survey (IOPS-MS)

Introduction: An ongoing national multicenter survey [Italian Oncologic Pain multiSetting Multicentric Survey (IOPS-MS)] is evaluating the characteristics of breakthrough cancer pain (BTP) in different clinical settings. Preliminary data from the first 1500 cancer patients with BTP enrolled in this study are presented here. Methods: Thirty-two clinical centers are involved in the survey. A diagnosis of BTP was performed by a standard algorithm. Epidemiological data, Karnofsky index, stage of disease, presence and sites of metastases, ongoing oncologic treatment, and characteristics of background pain and BTP and their treatments were recorded. Background pain and BTP intensity were measured. Patients were also questioned about BTP predictability, BTP onset (≤10 or >10 min), BTP duration, background and BTP medications and their doses, time to meaningful pain relief after BTP medication, and satisfaction with BTP medication. The occurrence of adverse reactions was also assessed, as well as mucosal toxicity. Results: Background pain was well controlled with opioid treatment (numerical rating scale 3.0 ± 1.1). Patients reported 2.5 ± 1.6 BTP episodes/day with a mean intensity of 7.5 ± 1.4 and duration of 43 ± 40 min; 977 patients (65.1%) reported non-predictable BTP, and 1076 patients (71.7%) reported a rapid onset of BTP (≤10 min). Higher patient satisfaction was reported by patients treated with fast onset opioids. Conclusions: These preliminary data underline that the standard algorithm used is a valid tool for a proper diagnosis of BTP in cancer patients. Moreover, rapid relief of pain is crucial for patients’ satisfaction. The final IOPS-MS data are necessary to understand relationships between BTP characteristics and other clinical variables in oncologic patients. Funding: Molteni Farmaceutici, Italy